topwingspaint

After the  car paint  spray, the surface of the car paint film appear needle-like holes, this phenomenon is called pinholes. In the paint drying process, what is the main reason for the emergence of pinholes? 1.when the paint is painted, the paint is too thick, the general situation is three times, but you spray four or five times, when the paint film is dry,  car paint thinner  and air contact time is too long, when they reach the surface of the film, so can only break out, this time there is no way to recover the pores, so left some pinholes. 2.if the solubility of the diluent is too strong, it is easy to break through the film to form small pinholes, according to the ambient temperature to use different types of thinner. 3.After spraying the film, the temperature can not rise too fast, because the film surface heating too fast, resulting in only dry appearance. The thinner and air break the paint surface to form pinholes. If pinholes appear, need to be polished ...

At present, many items show that the paint has a certain toxicity, so many friends are very concerned about whether the  car paint  is toxic, after all, health is first. In fact, if the paint is not a little toxicity, it is certainly a lie, it is only a toxic degree.  According to the relevant tests show that the general solvent-based paint toxicity or environmental pollution is higher than the water-based paint, if for safety reasons, we can choose to brush water-based paint for our car, however, the durability of waterborne coatings is lower than that of solvent-based coatings. However, the current state is advocating environmental protection, so environmental water-based paint is also increasingly popular in the regular automotive painting services.

The purpose of car washing is to make the car can be bright as new, but if the car wash is not easy to let the car lost luster. There are two precautions need to must pay attention, do not let the original car's hurt it. Washing powder ruined  car paint Washing powder is alkaline detergent, damage to the car paint, if long-term use of detergent to car wash, the car's surface will gradually lose luster. The corrosion of the paint is difficult to see in the short term. Special car wash fluid is neutral, will not damage the paint, but the price is slightly more expensive than the detergent. Car wash water speed should be noted professional car wash shop will never come up with a high pressure water gun mad spray, generally the first time must be slow water flow, from the top down, the car dust particles will remove with water flow.

How to judge whether a car is sprayed repair paint, we summed up two methods with you. 1.grinding method: Select the edge of the repair area, sanding the car paint with sandpaper until the metal surface is exposed, observe the structure of the paint film, if the cross-section of the paint section has a clear dividing line or a significant color difference, then this means that the car sprayed  car repair paint . 2.Measurement method: Use the film thickness measuring instrument to measure the thickness of the paint layer, if the measured thickness is greater than the standard thickness of the new  automotive  paint , that has been re-spray paint. 

1K paint does not need  car paint hardener , 2K paint required hardener high gloss without varnish. Mixed ratio refers to the weight ratio, such as 1K topcoat, 1K pearl paint, 1K silver paint with the proportion of thinner is 1 : 1, pay attention to no curing agent; 2k topcoat and varnish class belongs to 2K series that need to add curing agent and thinner, the ratio is generally 2 : 1 : 0.5, the ratio of single-component primer and thinner is 1 : 1, two-component primer,  epoxy primer  is generally 4 to 1 to 0.3. Of course, different  car paint manufacturers , different brands, mixing ratio may be different, you can view the surface of the jar, or listen to paint master. The thinner does not have a fixed amount, the main role of thinner is to adjust the paint spray viscosity, and finally volatilize, an appropriate amount is the best choice.

Many owners think that painting is not so complicated, want to quickly spray the  car paint , want to take the car early. In fact, the faster the car paint, the worse the car. Generally the work that spent a long time is preparations before painting. Clean, paste the newspaper, do anti-rust treatment for the  car primer , that is, spray  epoxy primer , car paint is not just a layer, it consists of a lot of single paint, and each lay is completed by paint baking. In simple terms, a lay of paint do badly, which will directly affect the next process. So still need enough patience to wait for the completion of spraying.

Between the car topcoat and the  car primer , between the  car repair paint  and the old paint layer, there will be poor adhesion phenomenon. What is the reason? 1. the surface clean is not clean or not prepared properly. If the abrasive dust on the primer layer, or other surface contaminants are not completely removed, the topcoat layer will not be in good contact with the primer layer, resulting in a barrier to poor adhesion. 2.car topcoat and the car primer is not matched, or primer and the substrate is not matched, or the primer layer is not dry on the spray paint. 3.Polish is not enough. 4.Thinner has poor quality, poor solubility. 5.metal background paint is stored for a long time, in the spray varnish, varnish and the base paint, the adhesion becomes poor.

After the collision of the car, it need to re-paint the car and spray paint on the car. The car will often have a lot of errors in the spray,  if these errors do not go to a timely solve, then there will be a serious impact on the  car paint , as car repair paint manufacturers , Let us teach you to correct the misunderstanding. 1. before spraying, the preparatory process is not done, may the place where need to paint is no clean up, the old coating did not clean up. In this case, after spraying the new coating, the surface will appear rough, uneven phenomenon. 2. the artificial color does not have the correct procedure, resulting in the presence of the color of the  automotive paint  color difference. When toning, first of all to determine the color of master, and then to conduct a test step by step, and ultimately get the right color. 3. the interference between the various processes, for example, in the case of relatively cold weather, some operators will be grin...

At present the application of metal paint is very wide, it has a protective effect on metal material. What is the advantage of  car metal paint ? Automotive metal paint  is currently the most popular kind of car paint on the market. Metal paint which contains a fine metal powder, in the light of the light can shine. The hardness of automotive metal paint is relatively high, the paint is relatively hard, not easy to be scratched, so to reduce the car paint trouble; The film is more tough, better adhesion, but also a strong anti-ultraviolet ability; film fullness is also better, extend the service life of the coating; in a different perspective can bring different levels of beauty, so that vehicle modeling looks more rich.

I take you to understand the  car paint  maintenance skills and routine maintenance. 1. In the maintenance of vehicles, do not use dirty hands to touch the car paint, or wiping the paint with oil cloth, do not place a sticky oil tools or a cloth containing an organic solvent on the vehicle body to avoid chemical reactions. 2. If the  automobile  paint  has no obvious scratches, do not easily carry out the second painting, to avoid the paint color is bad combination. 3. If the vehicle needs to be parked for a long time, it should be parked in a garage or a well-ventilated place, covered with a special body cover in winter. Even the temporary parking, but also choose a cool place. 4. We should avoid a strong impact,   bumps and scratches  on the body paint. If you find the paint has a scar or depression, should be promptly repaired, it is best to repair the beauty shop. 5. When the ow...

We are a professional factory to produce and sale  automotive paint , we have professional technical production personnel and scientific research personnel, we have many years of export experience, our customers all over the world, our main car paint has three brands, BOYET Series, MARSIDE Series, GOODSIF Series. Including poxy primer,  extra fast clear coat ,  car paint thinner  and others. We have our own production plant, if you are interested can come to visit our factory. In addition, we have strict requirements for our products, for each of the production process, it will be acceptance, after the end of the production will have a completion acceptance review meeting, we strive to provide customers with the best products.

Car coating  can prevent ultraviolet rays to damage the car paint, in the summer sunshine, after the long-term exposure to ultraviolet light, the chemical structure of  car paint  will slowly change, after a long time the paint will become lost luster, heterochromatic spots, and even cracks. The film surface can form a layer of dense positive and negative ion film, can effectively reflect the sun and ultraviolet light, prevent ultraviolet light burns on the paint. Prevent rain on the paint damage, in the increasingly developed industry, the acidic substances in the rain are also increasing, acid rain may come, rain water attached to the paint, resulting in continuous damage to the paint. After coating the surface of the vehicle will form a layer of corrosion-resistant layer to ensure that the paint does not receive damage. Repair the fine scratches, improve the paint surface brightness.