topwingspaint

What is the difference between a corrosion traces and a water mark? Water mark phenomenon occurs in a circle of water droplets, was a ring shape, but the erosion is a whole water droplets, rather than a circle. Birds and insect relics, leaves, tar asphalt may cause corrosion marks, these substances will have a chemical reaction with the paint, began to penetrate. They penetrate is faster than water marks. How do we solve the corrosion traces? Let us tell you response measures, generally only through the paint to remove cat paint erosion marks. Only a very minor mark can be used the grinding and polishing to solve. Commonly used high wax  polishing car paint  helps to prevent the emergence of corrosion marks.

In the paint coating process, there will be many traces of paint,  car paint  traces are divided into many kinds, the most common is the water marks. Almost all kinds of car paint may appear water marks, or called watermark. Water marks were ring-shaped, it is a trace left by the water droplets after evaporation. Chemical substances in the water mark will continue to have a chemical reaction with the car paint in the sun, thereby aggravating the traces. Oxidized car, cracked cars are more likely to catch water marks.  So what should we do? when the water marks are slightly, wax polish can be wiped out the marks, if the water mark is severe, the car needs to be ground or repainted.

1. Avoid using duster or dry cloth directly wipe the  car paint  surface, we should first rush to the car surface dirt, then use a clean absorbent to wipe dry. 2. When we park the car, we should consider to avoid prolonged exposure to sunlight, over time will make the paint fade, especially white paint and non-metallic paint. 3. Reduce the number of car wash, try not to polish the vehicle waxing. 4. Note that timely clean corrosive things, reducing paint corrosion. 5. When we drive our cars, we try to be less corrosive to the larger areas, such as the beach, the new shop asphalt road. These areas will be very obvious the existence of corrosive substances, likely to cause paint corrosion off. 6. We should clean the car after high-speed driving in the summer, especially the front of the vehicle.

Many novice are mistaken for the car's paint is quite thick, it is not.  Car paint  thickness is only 20μm (20μm = 1 / 50mm), so maintenance of  automotive paint  must note the following: 1.before, during and after using the vehicle, clean the dust timely, minimize the electrostatic adsorption of dust on the body. 2.timely rinse after the rain. Acid rain will damage the paint. 3.When we wash the car, should be started after the engine cooled, not clean vehicles in the hot sun or high temperature, so as not to leave the traces of detergent was drying. 4.scrub the vehicle should use clean, soft cloth or sponge, not use dry cloth, dry towels, so as not to leave scratches. When we wipe, should quietly wipe follow the direction of the water from the top down, do not circle and horizontal wipe.

Automotive coatings  as one of the largest users, in recent years due to their own needs and material progress, the demand for epoxy resin coating is growing, it has become the fastest growing powder coating industry varieties. Powder coatings, especially epoxy resin for automotive coating research has been more than 20 years, but because of automotive coatings require high weather resistance, high corrosion resistance, high wear resistance, and heat, light, color and other high-performance, and excellent decorative performance, development research has considerable difficulty, it is difficult to achieve breakthroughs in a short period of time. Powder coating began only for automotive parts,  automotive primer , anti-stone primer, etc.,used in car finish and finish varnish in bulk until the late 90s. With the maturing of technology and the improvement of the performance of powder coating, it has been fully able to meet the performance requirements of car painting, it becomes...

Life is colorful, as the color representation, paint coating is also indispensable, industrial paint brands, industrial paint manufacturers are more and more, Advertising paint,  automotive coatings  also a wide variety, we need to be cautious. Lift the  car paint  bucket, then shake, if there is splinters of sound, indicating a serious shortage of packaging, the number is less, viscosity is too low, regular manufacturers have real materials, when we shake, almost can not hear the sound. We should consult the business of the number of paint brushing and brushing the area, the calculation of the amount and material cost per square meter, do not be deceived by the price per barrel, the paint is made of the solid part (film) and volatile, units are often low consumption of particularly large, more expensive and more expensive waste, and the poor quality results.